How To Pick a Lock
Expand the description and view the text of the steps for this how-to video. Check out Howcast for other do-it-yourself videos from Chris_Davis and more videos in the Home Security category. You can contribute too! Create your own DIY guide at www.howcast.com or produce your own Howcast spots with the Howcast Filmmakers Program at www.howcast.com Locked yourself out of the house? Most common pin and tumbler locks can be picked with a little luck and finesse—so before you call a locksmith, try this. To complete this How-To you will need: A paperclip or safety pin A tension wrench (sometimes called a torque wrench) A second paperclip Warning: Only pick your own locks—or you could wind up in a lot of trouble. Step 1: Get a paperclip Get a paperclip or safety pin and bend it straight. Now make a slight upwards bend at the very end. Tip: You can buy a professional lock pick set at a hardware store. There is a basic size intended for American locks. Step 2: Insert the wrench Insert your wrench into the lower part of the keyhole—that is, the side opposite the one where the key's teeth would go in. Step 3: Determine direction Figure out which way the lock needs to be turned to open by turning the wrench clockwise and then counterclockwise. You'll feel which way has more give. Step 4: Turn the lock Turn the lock the correct way with the wrench, putting slight pressure on it. Hold the wrench in place. Step 5: Insert the paperclip While keeping pressure on the lock, insert the end <b>...</b>
